Rod latch systems

VISION Escutcheon Plate with Insert

Vision escutcheon plate is available for control mechanism (with flat rods) or available for cam with round rods. The escutcheon plate with Double Bit 3 or Double Bit 5 insert (marked with * in the table) can be combined with a partially covered insert ("key capture"), which makes the key stay attached to the escutcheon plate in the open position. This way the key may be used as handle while operating the door and can be removed again when the insert is turned to the closed position. The escutcheon plate is available as IP65 and is equipped with PUR-gasket and O-ring.

  • Escutcheon: Glass fibre reinforced polyamide (PA6GF30), black.
  • Insert: zinc die-cast, black powder coated or chrome plated.
  • Insert extension and cam base: Zinc die-cast, zinc plated.
  • Mounting hardware: Steel, zinc plated.

Suitable cut-out is either "E" on page 1-001.02 or cut-out "C" on page 1-001.01.

The product is suitable for metal thicknesses 0,8 mm – 3,5 mm.

VISION Escutcheon Plate with Insert (AAAA-BCDEFF)
AAAA- Housing B Material - insert C Surface treatment - Insert D IP Classification E Partially covered insert FF Insert
1520- Control mechanism 1 Zinc 3 Chrome 0 IP54 0 No 01 Square 6
1521- 90° clockwise or counter-clockwise 6 Black powder coated 1 IP65 1 Yes (key capture if combined with *) 03 Square 7
1522- 90° counter-clockwise 05 Square 8
1523- 90° clockwise 07 Square 8 / Slotted
08 Square 8 / M6
11 Square 8 / recessed
14 Triangle 7
15 Triangle 8
16 Triangle 10
22 Double Bit 3 *
24 Double Bit 5 *
26 Slotted
29 Slotted, recessed
36 Recessed hex 8/3mm pin
CAD File

1-007