Latching

Vibration Resistant Compact
Quarter-Turn Latch - 13,5 mm

A complete latch consists of housing, nut, insert, washer, screw and cam. Protection degree IP65 is achieved by an O-ring on the insert and a flat gasket on the housing. The latch can be supplied un-assembled, pre-assembled with enclosed cam or completely assembled.

Example: Housing - chrome plated A=20 B=3, brass nut, insert - square 6 - chrome plated, IP65-assembled, cam - zinc plated H=16,5 mm L=27 mm = P/N 2452-001250-1627.

Protection degree IP65 is achieved with an O-ring on the insert and a gasket on the housing.

  • Housing and insert: Zinc die-cast, chrome plated or black texture powder coated.
  • Standard nut: Brass, zinc plated.
  • Cam and screw: Steel, zinc plated.
    Washer: Stainless steel (304).

To fulfill DIN EN 61373 the latch can be supplied with screw with mechanical thread lock, see column B in P/N table.
SN = Standard nut.
TUF = Assembled with TUF-loc screw to achieve DIN EN 61373.

Vibration-Resistant Compact Quarter-Turn Latch - 13,5 mm (AAAA-BCCDEF-GGGG)
AAAA- Housing B Nut CC Insert D Surface E Assembly F Cam -GGGG H/L in mm
2452- Zinc - chrome A=20 B=3 0 SN 01 Square 6 2 Chrome 0 IP54 - not assembled 0 Steel -0000 No cam
2456- Zinc - black A=20 B=3 2SN+TUF02 Square 6 / M3 6 Black 1 IP65 not assembled -0724 7,5/24
13 Triangle 6,5 2 IP54 cam enclosed -0727 7,5/27
26 Slotted 3 IP65 - cam enclosed -0730 7,5/30
33 Recessed Hexagon 6 4 IP54 assembled -0934 9/34
5 IP65 assembled -1027 10,5/27
-1324 13,5/24
-1327 13,5/27
-1627 16,5/27
-1834 18/34
-1924 19,5/24
-1927 19,5/27
-2824 28/24
CAD File

2-110a