Latching

Compression Latch - 35 mm - Adjustable

Compression latch. Close and tighten with a single continuous half-turn motion. The first 90° turn moves the cam 90°, the second 90° turn retracts the cam 6 mm. This compression is shown as "C" in the drawing above.

The extended, threaded shaft allows you to place the cam along its entire length, resulting in a long distance for adjusting (a total of 20 mm).
Fix the cam with counter-nuts. The latch is supplied assembled, cam to be ordered separately.

  • Housing and insert: Zinc die-cast, chrome plated or black coated.
  • Extended shaft: Steel, zinc plated.
  • Nut for housing: Zinc die-cast, zinc plated.
  • Counter-nuts: Steel, zinc plated.

Other inserts on request.
Protection degree IP65 is also classed "Waterproof according to NEMA 4".

Compression Latch - 35 mm - Adjustable
P/N chrome P/N black Insert
241389-01 241589-01 Hexagon 11
241389-09 241589-09 Square 8
241389-11 241589-11 Square 8/M6 *
241389-12 241589-12 Triangle 7
241389-13 241589-13 Triangle 8
241389-14 241589-14 Triangle 10
241389-15 241589-15 Triangle 10 / M6
241389-16 241589-16 Double Bit 3
241389-17 241589-17 Double Bit 5
241389-18 241589-18 DB (Deutsche Bahn). On request.
241389-20 241589-20 Slotted
241389-21 241589-21 Recessed hexagon 10
241389-22 241589-22 Recessed hexagon 8
241389-28 241589-28 Triangle 10/M5
241389-47 241589-47 Recessed hexagon 8 / 3 mm pin
241389-56 241589-56 Tubular Asymmetric
241389-79 241589-79 Triangular 6,5

2-136