Latching

VECTOR P – Slam Action Paddle Latch
2-Point Latch

Heavy duty Vector paddle latch. Flush handle that assembles into your door with either a mounting bracket or with four mould-in bolts. Both alternatives provide a completely blind mount assembly.

Unique design with grip handle available as left, right or universal handle. The left and right handle provide not only an unique aesthetic appearance, but also provides the best possible grip in every situation, especially when mounted low or high in your application. Handles are available as "left", "universal" and "right". See drawing on page 2-830a for description, cut-out drawing and exterior dimensions.

This handle is used together with slam catch (page 2-770) and round 10 mm rods. This combination provides a slam action Paddle latch with two latching points, top-bottom, instead of one centered latching point. The system is designed to work great in applications where door and frame can move relative to each other and create a misalignment, e.g. moving trucks or construction equipment vehicles.

PUR-gasket from polyurethane and O-rings from NBR ensure a water- and dust tight sealing according to IP65. The handle is equipped with keyed alike 805-cylinder as standard and it is supplied with two keys. Key extraction in both open and closed position. Cylinders with other key codes offered upon request.

  • Body, grip handle, sliding cam and adapter for cylinder (internal component): Glass fibre reinforced polyamide (PA6GF30), black.
  • Maneuver arms: Zinc die cast, zinc plated.
  • Mounting bracket, mould-in bolts, maneuver mechanism and striker used inside sealed area: Steel, zinc plated.
  • Cylinder: Zinc die cast with stainless steel (304) cap and dust shutter.
  • O-rings: NBR.
  • PUR-Gasket: Polyurethane.
  • Nuts (2 pcs) supplied with mounting bracket version: Steel, zinc plated.
  • Slam catch and Ø 10 mm rod: Page 2-770.

The tightening torque of the two nuts for the mounting bracket is 3,0 Nm. The tightening torque of the four nuts for the mould-in bolts is 2,2 Nm. It is important that the four holes made in the cut out for the mould-in bolts are within tolerance, to avoid damage when tightening the M5 nuts.

Horizontal mounting of latching rods is recommended in vehicles and very vibrating applications.

VECTOR P – Slam Action Paddle Latch - 2-Point Latch (AAAA-BBCCDDE-FFGG)
AAAA- Description BB Handle CC Mounting DD Cam E Type -FF Cylinder type GG Striker
2800- VECTOR - Paddle 0 Universal 01 Mould-in bolts 04 2-point latch 0 Standard -01 805 00 No
1 Left 02 Mounting bracket
2 Right
CAD File

2-832a