Compression Latching Hinge with Safety Catch -
180º Hinge-Latch, or latching hinge that may be used as hinge or latch according to need. Allows you to open door as left- or right hinged door, or to remove door completely. Universal left- and right assembly.
Provides 6 mm compression and has a built-in safety catch for safe opening of pressurized doors. Patented and registered design.
Clicks into distinct open and closed position for tactile feedback.
Vertical adjustability together with guidance between door and frame parts, makes it easier than ever to get the perfect sealed door. Available in non-locking, push-button, keyed and tool operated version. Also customizable with your logotype.
Note that a normal panel will need four units in order to operate as either left-open, right open, or completely removable.
Mount the door part with blind rivets (pop-rivets). The frame part may be mounted with screws or blind rivets.
No problems with thermal break as units are surface-mounted on to door andframe parts, resulting in no parts intruding through the double skinned doors.
Same frame part is used in K2 hinge found at page 3-156. By mounting the frame parts symmetrical on left and right side of the frame and use K2 hinges on one side and latching hinges on the other side the end user can choose to have the door mounted either way, right- or left hinged.
When mounted in a properly rated, suitable enclosure this handle meets the requirements for sealing level L1 regarding positive or negative air pressure according to DIN EN 1886.
Key extraction: Open/closed.
* Supplied with two keys.
|Compression Latching Hinge with Safety Catch - System KLIMA-FLEX|
|Keyed IL101 *||0 mm|
|Recessed Hexagon 10||0 mm|
|Recessed Hexagon 10||10 mm|
|Keyed IL101 *||10 mm|