Rod latch systems

System VISION Inside

Vision Inside latching system is mounted inside the sealed area and provide IP65 together with our Vision Swing handles. Latching points equipped with roller cams for smooth compression and latching. Multiple latching points for perfect sealing in tall applications.

System with more than four latching points available upon request. Control mechanism comes complete assembled with flat rod. Latching points ordered separately.

Vision inside system can be equipped with additional standard cam on the control mechanism together with adapter (see table), for center latching point.

  • Control mechanism: Zinc die cast, zinc plated or special surface treatment or glass fiber reinforced Polyamide (PA6GF30).
  • Flat rod: Steel, zinc plated or stainless steel (316).
  • Roller cam and nut: Steel, zinc plated.
  • Roller and latching points: Glass fiber reinforced Polyamide (PA6GF30), black.
  • Adapter: Zinc die cast, zinc plated.
VISION Inside Rod Latch System
P/N Standard P/N Highlander P/N Polyamide Description
132110-A 139010-A - Roller cam
135010 135010 - Latch point
1302-00A1A2B1B2 1302-01A1A2B1B2 1352-00A1A2B1B2 Control mechanism with pre-assembled flat rod
1302-0000002000 1302-0100002000 1352-000000-2000 Control mechanism with 2000 mm pre-assembled flat rod. Cut-outs every 100 mm.
131116-07 - - Adapter for attaching standard cam on control mechanism
131116-05 - - Adapter for attaching roller cam on control mechanism