Compression Latching Hinge GEN2 w. Safety Catch -
Patented 180º Hinge-Latch, or latching hinge, that may be used as hinge or latch according to need. Allows you to open door as left- or right hinged door, or to remove door completely. Universal left- and right assembly. Provides 6 mm compression and has a built-in safety catch for safe opening of pressurized doors. Thanks to smooth geometry it provides excellent ergonomic when maneuvering. Two-stage opening provides always a safety catch function to prevent a positive pressurized door to hit the operator when opening the unit. Clicks into distinct open and closed position for tactile feedback.
Vertical adjustability together with guidance between door and frame parts, makes it easier than ever to get the perfect sealed door. Available in non-locking, keyed and tool operated version. Also customizable with your logotype.
Latch hinge is available with mounting bracket for door part to achieve best possible stability. Without mounting bracket the door part is directly mounted on the door with three screws and same cut out as Hinge-Latch on page 2-317a/b can be used. The frame part and mounting bracket may be mounted with screws or blind rivets. Holes in door part is designed for screw mounting.
No problems with thermal break as units are surface-mounted on to door and frame parts, resulting in no parts intruding through the double skinned doors. Geometry of this Hinge-Latch is designed to create best possible compression of gasket. Meets the requirements for sealing level L1 regarding positive or negative air pressure according to DIN EN 1886. Logotypes, other inserts, other colors and offsets from 0 – 25 mm offered upon request. Products marked with * are key-locking and are supplied with two keys. Keys for insert ”Recessed Hexagon 10” are found on page 2-380.
Note that a normal panel will need four units in order to operate as either left-open, right open, or completely removable. Same frame part as Klima-flex hinge on page 3-156. Self-tapping screws for mounting on door and frame are included.
Cylinder version supplied with two keys.
How to order.
Example: P/N 2651-440080-01
|Compression Latching Hinge with Safety Catch - System Klima-flex GEN2 (AAAA-BBCCDD-EE)|
|AAAA-||Description||BB||Type||CC||Offset frame part||DD||Insert/Cylinder||-EE||Description|
|2651-||System Klima-flex GEN2||44||Latching Hinge GEN2||00||0 mm||00||Non-locking||-00||Without mounting plate|
|10||10 mm||03||Square 7||-01||With mounting plate|
|22||Double Bit 3|
|24||Double Bit 5|
|34||Recessed hexagon 8|
|35||Recessed hexagon 10|
|36||Recessed hex 8 / 3 mm pin|