VECTOR 3 – Central Locking T-handle
Vector T handle for central locking vehicle applications. The Vector 3 T-handle for central locking is available for either 12 or 24 volt systems. The unlock / lock signal comes from the vehicles central locking system, typically from the CAN-Bus system. Available in versions with feedback if the T-bar handle is in open or closed position and if the Vector T-handle is in unlocked or locked position.
In case of power failure the latch is equipped with a mechanical override cylinder under the dust cover. It’s sealed to IP65 preventing water and dust find it’s way into the inside of the application. Flush T-handle with 4 mm compression. Four blind-mount studs ensure a water tight assembly (Maximum tightening torque 2,2 Nm). Standard length of cast-in studs for mounting on single metal sheet doors. Vector 3 T-handles for thicker doors upon request.
Available with fixed or adjustable roller cams, as well as 2- and 3-point latching options.
Power requirements 12VDC/2A or 24VDC/2A, lock/unlock by reverse polarity (impulse length 0,3-1,0 s).
Optional sensor output:
Sensor 1 Handle unlocked – open circuit, handle locked – closed circuit (max 30VDC/500mA).
Sensor 2 Handle open – open circuit, handle closed – closed circuit (max 30VDC/500mA, total max 10W).
2739-12105-S5400: Handle and shaft SS, polished T-handle. For 12 volt system, feedback signals for both open/closed and unlocked/locked. Standard interface. 2-point cam.
|VECTOR 3 – Central Locking T-handle (AAAA-BBCDE-FF)|
|2730-||SS (304) / SS (303)||Black||12||12 volt system||0||No signal||1||Standard||1||Max 10 mm||5861||Fixed 1-point||58||61|
|2739-||SS (304) / SS (303)||Polished||24||24 volt system||1||Open/closed + unlocked/locked||S5400||2-point||-||-|